Details
1000mW 532nm green Diode-Pumped Solid-State (DPSS) laser system creates the first professional DPSS laser at LaserTo. This DPSS green laser has a normal continuous wave (CW) working mode. Both 10 KHz TTL and analog modulation are available to be built into lasers as required by customers for special requirement with extra fee added. LaserTo’s 1000mW green DPSS laser system is always best choice for high-tech research in world’s top universities, institutes and prominent research facilities.
Featured characteristics of 1000mW Green DPSS Laser System:
● The best cooling system to assure stable performance. Green DPSS laser system adopts both fan and TE cooler (TEC) to achieve stable output power in continuous work.
● Ultra compact structure and light weight.
● Low energy consumption and high efficiency. Green DPSS laser system is able to run on standard AC power with low power consumption of less than 50W powerful supply.
● Long serving time. This stable performance DPSS green laser provides a long serving life of 10000 hours.
● Wide application in high-tech fields. This high DPSS technology device is mostly applicable in fluorescence excitation, PIV, Raman Spectroscopy, laser display, and other high-tech reaches etc.
Packing List:
● 1 DPSS Laser Head
● 1 Driver/Power Supply
● 1 Power Cable
● 1 driver shell (payable custom)
Technical Parameters:
Name | 532nm Green DPSS Laser System |
Wavelength | 532nm |
Output power | 1000mW |
Transverse mode | TEM00 |
Operating mode | CW or 10KHz TTL, Analog modulation |
Power stability (rms, over 4 hours) | < 5% |
Warm-up time(minutes) | 15 |
M2 factor | <1.5 |
Beam divergence, full angle (mrad) | ~1mrad |
Beam diameter at the aperture (mm) | ~ 2mm |
Beam height from base plate (mm) | 35.5mm |
Spectral Line Width(nm) | <0.2nm |
Polarization ration | >100:1 |
Noise of amplitude (rms) | ~10% |
Point stability after warm-up (mrad) | <0.05 |
Operating temperature (℃) | 20~40 |
Power supply | AC220V OR 110V |
Dimension and Weight of Laser Head | 66mm×70mm×162mm; <1.5KG |
Dimension and weight of power supply | 30mm×60mm×110mm; 130g |
Expected lifetime (hours) | 10000 hours |
Warranty period | 1 year |